Products

USB 3.2 Gen1X1 PHY IP is available in 12nm/16nm and 28nm process

Overview

M31 USB3.2 Gen1X1 transceiver IP provides a complete range of USB3.2 Gen1X1 host and peripheral applications. It is compliant with the PIPE 4.0 and UTMI+ specification. The USB3.2 Gen1X1 IP integrates high-speed mixed signal circuits to support super-speed traffic at 5Gbps and is backward compatible to high-speed data rate at 480Mbps, full-speed data rate at 12Mbps and low-speed data rate at 1.5Mbps.

Highlights

  • Worldwide smallest USB3.2 Gen1X1 PHY IP in 28nm process (IP size is smaller than 0.5mm²)
  • Fully compliant with Universal Serial Bus USB3.2 Gen1X1 and 2.0 electrical specifications
  • Compliant with PIPE4.0 and UTMI+ specification (Super-Speed, High-Speed, Full-Speed and Low-Speed functions)
  • Supports clock inputs from 25MHz crystal oscillator or external 25MHz clock source
  • Provides plenty of register controls for TX, RX, SSCG-PLL and CDR electrical parameters
  • Silicon proven and mass production IP records
  • USB-IF certified PHY IP are available in 7nm, 12nm, 14nm, 16nm, 22nm, 28nm, 40nm, and 55nm process

TX Eye Diagram

RX Jitter Tolerance
Rx_5G_JTol
For USB 3.2 Gen1X1 Device with Standard-B Connector

EN
ZH EN